This blade is handmade from 1095 steel and 15n20. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening.

This item is for hunting. This blade is handmade from 1095 High Carbon Steel and 15n20 Steel. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Pin hole sizes may vary and we are not able to determine the size of the holes of the exact product you will receive since it will be shipped by Amazon. Blank may require additional sharpening.

Partial/Hidden Tang Drop Point Blade Style. This blade is handmade from 1095 high carbon steel and 15n20 alternating steel layers. The finger guard is solid brass, and comes pinned to the knife. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening. Blank filework may vary or be absent. We try to keep them all consistent but sometimes the filework may vary or be absent. 100-200 Layers of Damascus Steel. Blade comes sharpened. A final edge may be applied for an even sharper razor edge. This is a stock photo of the item. It is not the exact blank you will receive. Pin hole size(s) and locations may vary. Each damascus pattern will vary and measurements may vary as each blank is hand-made.

420 stainless steel construction. 420 is a general purpose stainless steel containing medium quantity of carbon. It has good strength and reasonable impact resistant properties in both hardened and tempered conditions as compared to 440 grades. It has good corrosion resistance qualities in mild atmosphere, domestic and industrial environments. It is resistant to ammonia, blood, carbonic acid, crude oil, detergent solutions, dilute nitric acid, fresh water, food acids, many petroleum products, steam and vinegar, etc. It is also called “surgical steel” because it is being used in production of surgical instruments on large scale around the world due to its good corrosion resistance and its easy machining qualities. It is also being used in cutting tools like: Knifes, Daggers, Swords, Haircutting Scissors and Domestic Scissors. Its grinding is easy and it produces a fine, vivid and smooth, polished surface. 420 steel, due to its excellent harden-ability, is capable of getting hardened up to 56 HRC Rockwell or higher depending upon carbon contents / composition. Useful for hunting, camping, fishing, collecting and other hobbies.

This blade is handmade from 1095 steel and 15n20. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening.

This blade is handmade from 1095 steel and 15n20. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening.

Our mosaic pins are hand-crafted by a veteran knife-maker in the USA.

As a note: It is possible to drill a knife blank’s pin holes larger (or create your own pin hole locations). You simply need to use drill bits intended for drilling metal, which are capable of drilling through hardened high carbon steel. This method is recommended because you be able will get the exact fit you are looking for when using our mosaic pins.

You will receive one piece of mosaic pin stock. Each piece comes in approximately 5.8″ length.

We use only the highest quality brass, copper and steel.

If your knife handle is 0.75″-0.9″ thick, this mosaic piece will make 6 pins when cut, good for several knives.
If your knife handle is 0.95″-1.15″ thick, this mosaic piece will make 5 pins when cut, good for several knives.
If your knife handle is 1.2″-1.4″ thick, this mosaic piece will make 4 pins when cut, good for several knives.

Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.

The center of the mosaic pin is filled with clear epoxy resin. The filling will appear dark when initially received, however light will be able to shine through when you are done cutting this down to small pieces for your knife handle. The transparency will become evident with the smaller length pieces.

You wont get any “rattlers” with our high quality mosaic pins (a “rattler” is where you have loose pieces inside the mosaic pin).

A penny is shown for a size comparison. Penny not included.